Electrodepot  
 


 3 Channel Remote Digital Pump Control KIT

Application EXAMPLE
 		 Complete system with four channel Transmitter and Receiver for 2 Miles of Line-of-Sight range  Up to 10 Miles with optional Long Range Antenna
Over 64,000 Codes, Weather-Resistant Case,
 
 Special order include:
1  Transmitter set  937144
1  Receiver set  937044
2  Antennas, 8"
2  NEMA 4X non metallic enclosure
2  Power adapters 12VDC
1  Wiring Diagram

     937200   $1,899.99   Special Order

OPERATION:
Pre programmer panel for a three float circuit application,
On contact closure (Low) sends a pulse to start the pump process,
on contact closure (Stop) sends a pulse to stop the pump process,
with (Overflow ) second  stop signal is transmitted to end the pump process

 Wiring diagram example

 SPECIFICATIONS
Operating Voltage: 12 to 15. VDC
Operating Temperature: -4° to +140° F (-20° to +60° C)
 Receiver Type:  Digital Superheterodyne -118 dB 
 Frequency  27,255 MHz
 Codes:  65,536 DIP switch programming
Current Drain Receiver  25 mA, standby, 195 mA operation
Transmitter 1 mA standby, 2 Amp 7 sec.
Data process  Encoded Loop response 500 ms.
Relay Output 10 Amp max 30VDC -  250VAC N/0 and N/C
Antenna  50 Ohms Quarter Wave, Antenna optional
Dimensions: 10 in L x 8 in W x 4 in H (254 x 200 x 100 mm)
Weight 6 lb. (3 Kg) each
Enclosure NEMA 4X non metallic waterproof
Optional

Long Range Antenna Kit  $79.99 

Optional

Mechanical Float Switch  $69.99 

System 937144 Ready for Solar operation
 12VDC, Solar panel Kit 20W   $299.99 

DISCLAIMER:  Contact a licensed professional for your project.