Electrodepot
 
4 Channel Remote Control Digital  System RECEIVER
2 Miles of Line-of-Sight range Up to 10 Miles with Long Range Antenna
Over 64,000 Codes, Weather-Resistant Case, Power On and RF Activity Indicators

Wiring Diagram

937004   $379.99 

Antenna not supplied Select Antenna

Select Transmitter

SPECIFICATIONS
Output  N/0 and N/C relay 1 Amp @ 32 VDC isolated  contacts
Operating Voltage: 12 to 15.o VDC
Operating Temperature: -4° to +140° F (-20° to +60° C)
Receiver Type:  Digital Superheterodyne
Sensitivity:  -118 dB (minimum)
 Selectivity 6 KHz
Carrier Frequency 27,255 MHz
Number of Codes: 65,536
Code Setting Method  DIP switch programming
Data Input Alarm, restore, status, and low battery
Status Exception Time Frame: Four hours
Antenna Impedance 50 Ohms Quarter Wave Antenna  Whip 8" Antenna
Dimensions: 4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159 mm)
Weight 1 lb. (0.454 Kg)
Current Drain 25 mA, typical standby 65 mA alarm @ 12 VDC
Outputs: Alarm  form "C" relay per channel  
Antenna Required:  Whip 8" Antenna    or   Long Range Antenna
Low Battery one open  collector output 50 mA @ 20 VDC to ground
 
Power adapter 12 VDC Power relay 10A  Power relay 30A   Latch relay 12V

 

.

    Warning: Radio control equipment is not to be used in life safety